The frame identification number is located between the chainstays and the main frame on the bottom of the motor.

The Porsche eBikes are delivered approximately 95% assembled in a transport box. The handlebars are turned in by about 90 degrees and no pedals are mounted. Video about unboxing & assembling the eBike: Unboxing video

The Porsche eBike is not generally authorised for use with a child bike trailer. The use of a child trailer is done at your own risk.

The Porsche eBike Sport is the perfect choice for touring and sporty riding on gravel. The Porsche eBike Cross models are designed for off-road use and offer a little more reserves with 120 mm of spring travel at the front.

In order to set up your new Porsche eBike so it is ready to ride and tailored to you, you will need the following tools: a suspension pump, torque wrench including bit inserts, Allen key (4 mm, 5 mm, 8 mm), some grease for the pedal threads.

The Porsche eBikes can reach a speed of 25 km/h with motor support​. Above 25 km/h, you pedal with pure muscle power. The EP-801 motor offers two driving profiles: Profile 1 offers three support modes: Eco, Trail and Boost, while Profile 2's Fine Tune mode allows up to 15 support levels to be set individually

The chassis of the Porsche eBikes can be adjusted to the rider's weight via the air pressure in the suspension fork and suspension.

There are numerous suitable accessories available from specialist bike shops. It is best to get advice from a specialist dealer. Wear parts such as brake pads, chains and cassettes can also be purchased there.

The Porsche eBike Sport is the perfect companion on tours or in urban areas. The sporty seating position ensures a real Porsche driving experience and impresses with a very clean look. Equipped with a 630 Wh battery (S size: 504 Wh), longer distances are no problem. Thanks to the 100 mm spring travel at the front and rear, the Porsche eBike Sport is also ideal for gravel roads.

The Porsche eBike Cross is a sporty e-mountain bike that is perfect for moderate trails and forest paths. It impresses as a real all-rounder.

The Porsche eBike Cross Performance is a sporty e-mountain bike that is perfect for moderate trails and forest paths. It has higher quality equipment than the Porsche eBike Cross and thus offers more performance in terms of braking power and battery capacity, while also featuring weight-reducing carbon components. The Porsche eBike Cross Performance is the perfect choice for ambitious (e)mountain bikers who are looking for more.

The Porsche eBike can also be ridden when the drive system is switched off. A slight resistance to pedalling, which is caused by the motor transmission, must be taken into account.

The Shimano EP8 is used in the Porsche eBikes. Since model year 2023, the update has been designated with the name Shimano EP801. The drive batteries are also from Shimano. The battery capacities vary depending on the model and are rated as follows: Porsche eBike Sport: 630 Wh (S size: 504 Wh),
Porsche eBike Cross: 504 Wh, Porsche eBike Cross Performance/EXC: 630 Wh (S size: 504 wh).

The range depends on many factors. These include the driver's weight, tyre pressure, cadence, support level and elevation profile.

The exact charging times can be found here: https://bike.shimano.com/en-US/product/component/ep8-ep801.html

The weights are as follows (measured in frame size M, including the supplied pedals): eBike Sport: 21.2 kg, eBike Cross 21.7 kg, eBike Cross Performance/EXC: 21 kg.

The frames of the Porsche eBikes are made of carbon. Both the rear end and the main frame are made of the lightweight composite material.

Suspension fork: the built-in Magura Boltron upside down air suspension fork offers 100 mm of spring travel and can be adjusted to the respective driver's weight via the air pressure. In addition, the fork has an adjustable rebound stage that can be used to adjust the rebound speed.

Suspension: the built-in Fox Float DPS air suspension can also be adjusted to the rider's weight and, in addition to the rebound stage, has a three-stage compression stage setting.

Suspension fork: the built-in Fox 34 Performance air suspension fork offers 120 mm of spring travel and can be adjusted to the respective driver's weight via the air pressure. In addition, the fork has an adjustable rebound stage that can be used to adjust the rebound speed. A compression adjustment is also on board.

Suspension: the built-in Fox Float DPS air suspension can also be adjusted to the rider's weight and, in addition to the rebound stage, has a three-stage compression stage setting.

Suspension fork: the built-in Fox 34 Factory air suspension fork offers 120 mm of spring travel and can be adjusted to the respective driver's weight via the air pressure. In addition, the fork has an adjustable rebound stage that can be used to adjust the rebound speed. A compression adjustment is also on board.

Suspension: the built-in Fox Float DPS Factory air suspension can also be adjusted to the rider's weight and, in addition to the rebound stage, has a three-stage compression stage setting.

All of the Porsche eBikes have hydraulic disc brakes from the Magura brand. These are particularly powerful, as the brake discs are optimised for eBikes.

The Porsche eBike Sport features rolling resistance-optimised Continental Race King tyres with a width of 2.2". The Porsche eBike Cross and Cross Performance/EXC features Continental Trail King tyres with a width of 2.3" at the front and 2.2" at the rear.

The Shimano display SC-EM800 is installed on the Porsche eBike. The control unit on the handlebars for selecting the riding mode is also from Shimano (SW-EM800-L).